N Scale PRR I1s Completed

Here's my completed model of a Pennsylvania Railroad Class I1s 2-10-0. This was one of the most involved kitbash projects I've ever undertaken. I started out with w Minitrix 2-10-0 (More about that locomotive here www.spookshow.net/loco/decapod…. First I modified the hell out of the chassis so I could slide the shell backwards and make the steam pipes line up with the cylinders.

Next, I cut the pilot off and added a piece of styrene between it and the rest of the shell. I made the two front air tanks from styrene rods, which I chucked in my electric drill and ground against a jeweler's file to get the rounded ends. The pipe connecting the tanks is actually a very short piece of wire.

I painted most of the shell Floquil "Brunswick Green," the cab roof Floquil "Tuscan" and the smokebox Floquil "Graphite." The tender shell was already painted in the correct colors as it was a leftover from another project.

I swapped the stock tender for a Bachmann USRA Medium-distance tender, which not only more closely matches the prototype, it also has 8-wheel pickup. A common malody among all three Mintirix steamers is poor power pickup and adding the 8-wheel pickup to the tender does wonders for their performance.

The "Pennsylvania" decals on the tender is from Microscale and the cab numbers are Woodland Scenics dry transfers.

After that was done, I sprayed the tender and engine shells with Testors Dulcote and used various shades of gray pastels for weathering.

All in all this project was intense. It took me about 2 months of working on and off to complete.